Clean the dusty by air compresspor,especially work in polluted air ,you should clean at
least one time every day.
The compressed air should well adjusted and according to requirements, avoid small parts
inside broken.
Check the electricity and gas connection, make sure it is well fixed. if some parts i
s oxidized, pls grind these parts and connect again.
Avoid wet in inside of machine. If any water inside, shall test the insulation by
megameter,continue to use when it is acceptable.
If the machine cant work for a long time, you should packed the machine and locate it in
dry environment.
Workers should clear the dusty of motor on the feeder and paint oil on feeder roller ,after feeder
works every 300 hours .
CAUTION: make sure the electricity is cut off when doing
maintain work ,make sure the power plug is pulled out
before open the shell.
