WARNING:
while welding and cutting, please protect yourself, it may harm your body and others .
pls following our instructions:
Electricity may cause death!
⚫
Following operation standard, install the earth setting.
⚫
when skin is bare or workers wearing wet glove or wet clothes ,It is forbidden to touch
workpiece or electrode with electricity.
⚫
Make sure you are insulate to the earth and the workpiece .
⚫
make sure your working location is safe
.
Arc
–
may harm your eye and burn your skin!
⚫
Wearing suitable clothes and mask,glass, to protect your eye.
⚫
Use suitable mask and blind to protect the person nearby.
⚫
Welding may cause fire, so please make sure workplace nearby is without any tinder.
This welding machine is based on advanced inverter technology, installed special reactor inside,can
control
short circuit in the welding process.compared with silicon control welding machine , the outgood
welding features is as following: stable feeder speed, light,energy
–
saving, without noise. Little
current can also works stable,more suitable for welding thin workpiece of low carbon steel,alloy,
stainless steel. Also can balance when the voltage is not stable, with little spatter,deep penetration
and high duty cycle.
Installation:
Euiped with voltage compensate system ,so the machine can work normally when the actual voltage
is
±
15
％
than rated voltage.
In order to avoid voltage reducing,it is suggested to use bigger dimension cable when using longer cable.and
if the connecting cable is too long, it may affact arc striking and other performance.so we suggest you
use the suitable length as we recommend.
make sure the ventilate part is not blocked , or the cooling system may not work.
CAUTION!
USE THIS MACHINE SHOULD INSTALL ELECTRICITY LEAK
PROTECTION SWITCH !
