7
www.mabrustore.com
STEPS:
2
. Drill the 4 holes for the pass-thru bolts.
(For easier fit, use a unibit drill to oversize the holes)
3
. Once the opening is cut you must smooth the edges
and paint it with anti-rust paint.
4
. Clean the surface thoroughly of any debris, dirt and/or
grease to allow the gasket seal properly.
5
. Carefully carry the unit in the box, still facing up to have
access to the black plastic Mounting plate
(Outdoor and indoor unit separator)
Summary of Contents for RVSC 12000 BTU DC 12V
Page 2: ......