14
1-888-818-2814 • [email protected]
STEPS:
7.
Take out the remaining 2 nuts holding the Styrofoam
conduit in order to pull it out and make any necessary
cuts to mold it to size.
8
. From inside the vehicle, lay the Styrofoam on the surface
and mark the cutouts in the Styrofoam duct to fit the
smaller area you are trying to fit. (You may encounter
some obstructions, such as roof rails.) Keep in mind that
you are adding extra inches between the unit and the
internal face of the unit, so the Styrofoam needs to be
adjusted on its depth measures as well.
CUSTOMIZED INSTALLATION INSTRUCTIONS:
CONT'D
Summary of Contents for RVSC 12000 BTU DC 12V
Page 2: ......