Recalling Measurements in Memory
1.
Press the Power button to turn the
thermometer on.
2
. Press the ‘Memory’ button to recall up
to 10 measurements stored in memory,
Fig. 1.
3.
The
symbol or
symbol will appear with each
measurement stored in memory to indicate whether
a person or object temperature was taken,
Fig. 2.
4.
The happy face
or sad face
symbol will appear
5 seconds after viewing the measurement stored in
memory.
NOTE:
After 10 measurements have been stored in the
memory, the oldest reading will be automatically deleted.
Clearing Memory
1.
Press the Power button to turn the thermometer on.
2
. To clear the memory, simply hold the ‘Memory’ button
down until the thermometer beeps and two horizontal
lines appear,
Fig. 3.
Memory Recall
Replacing the Battery
When the battery symbol
appears on the screen, the batteries will
need to be replaced soon. When the letters “Lo” and the battery symbol
appears on the display, the batteries need to be replaced before taking
another measurement. Rechargeable batteries are okay to use in this
thermometer.
Replacing the Battery
1.
Gently slide the battery cover back.
2
. Carefully remove the old batteries and properly discard.
3
. Insert new batteries according to the proper polarity.
4
. Slide the battery cover back on.
NOTE:
Please properly dispose of the batteries away from small children
and heat.
Fig. 2
Fig. 3
13
12
Fig. 1
Memory Button
Mode Button
