Overall Width:
28”
Storage Pouch:
15” x 10” x 7”
Wheels:
8”
Handle Height:
33” – 39”
Width Between Handles:
18”
Seat:
14” x 13”
Seat Height:
22”
Weight:
18 lbs.
Weight Capacity:
300 lbs.
ASSEMBLY INSTRUCTIONS:
1. Flip down rear wheels until they lock securely into place,
Fig. 1
.
2. Insert front wheels into frame, locking the brass retainer pins securely into position
through the holes on both sides of the rollator frame,
Fig. 2
. Position the star-shaped
knob onto bracket and tighten until secure,
Fig. 3
.
3. Place rollator upright with wheels on the floor. Push down on the center folding hinge
until it locks into place,
Fig. 4
.
4. Insert handlebars with pre-assembled hand brakes into rollator frame,
Fig. 5
. To adjust
height of the handlebars, align the holes in both the frame and handlebars and insert
screw through holes in the rollator bar. Attach washer and star-shaped knob over the
end of the screw and tighten until secure. Before use, make sure the handlebars are
level and aligned with the rear wheels.
5. Position the removable backrest onto rollator frame and secure by locking the brass
retainer pins into position through the frame holes on both sides of the rollator frame,
Fig. 6
. Lower the padded seat over the pouch.
6. Before use, test and adjust the tension on the braking system to ensure proper and
secure braking.
WARNING!
It is very important that you read all instructions before assembly and/or
use of this rollator. Before using the rollator, be sure your weight is within the weight
capacity of the unit. This rollator will require little assembly, which can be performed
without tools.
PARTS FOR ASSEMBLY:
Four (4) wheels; two (2) handlebars with loop-lock brakes; one (1) storage pouch; one
(1) backrest; two (2) washers; two (2) knobs
INSTRUCTIONS FOR TOOL-FREE ASSEMBLY
PARTS OF YOUR ROLLATOR AND SPECIFICATIONS
Hand grips
Backrest
Front wheels
Rear
wheel
Hand brake
Brake cable
Retainer
pin
Pin
Knob
Knob
Folding hinge
Seat
Storage pouch
2
SPECIFICATIONS
1026-Series
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
