Maber MB500/120-SP, Instruction And Maintenance Manual

Page: 16 / 52

16
13. INSTALLATION
The lift must be installed only by skilled workers authorised for operation.
The machine must be installed on a floor able to bear the following loads relative to the
height of the vertical column
Column
height
Machine
weight
Working
capacity Total
load
m. Kg. Kg. Kg.
1,5 440 300 740
25 1090 300 1395
50 1740 300 2040
75 2390 300 2690
100 3040 300 3340
120 3560 300 4860
Lay underneath the support worm screws some shimming
plates compatible with the total applied load.
The placement area must comply with the following minimum
dimensions, to allow access around the machine for the
various installation and operation jobs.
To assemble the machine use a pair of 24 mm. hexagonal
wrenches.
.
After the above check, install the machine strictly
following the guidelines below:
x
Lay the base on the ground.
x
Check that its distance from the wall is regular
matching the type of bolting supplied ( minimum
distance 50 cm).
x
Use a spirit level to check the horizontal alignment of
the base and the vertical alignment of the column.
Make the necessary adjustments with the 4 lateral
adjusting screws
(1) . After levelling, lock the screws
with their ring nuts (2) .
x
Make sure that the screws (4) of the vertical column on
the base (1) are firmly tightened. Otherwise tighten
them properly.
x
Check the access ramps (8) and the access closing
arms (9) work regularly .
x
Swivel the cable-guide arm (10) to its regular position
and lock it.
x
Fit the 2 nd column (11) and lock it with the screws
provided.
COPY