mabe RMI2160XSAB0, Use & Care Manual

Page: 13 / 37

12
Hang the Freezer Door
1. Lower the freezer door onto the center hinge pin. Be sure the
washer is in place.
2. Lift the top hinge so the pin fits into the door socket. Support the
door on the handle side and make sure the door is straight and
the gap between the doors is even across the front. While holding
the door in place, tighten the top hinge screws.
2.3 Door Space Requirements
The unit’s door must be able to open fully as shown.
W × D > 50.8 inch × 58.5 inch
2.4 Levelling the Unit
To do this adjust the two levelling feet at the front of the unit.
If the unit is not level, the door and magnetic seal alignments will
not be covered properly.
Look down from the top, clockwise and counterclockwise loosening,
tightening.