mabe PSS21 Series, Service Manual

Page: 22 / 65

- 20 -
1. Remove the upper cover of the water filter.
2. Open the lugs of the opaque top light cover and
remove the cover.
3. Open the upper lugs of the work duct and remove
it
GEA00934
4. Remove the screws (8) Phillips head for the
plastic clamp assembly of the upper light.
9. Place the fan and shock absorber assembly
against the compartment and open the rear cover.
10. Disconnect the wire connections and remove the
damper or fan.
Shock absorber DELI FRESH
The DELI FRESH damper is located below the cold air duct.
Allows the cold air flow to be adjusted to the DELI FRESH
drawer.
1. Remove the DELI FRESH damper by adjusting
the knob and lower light cover.
2. Remove the center duct by opening the top and
bottom lugs. Double-side adhesive tape is
applied to the upper and lower areas.
3. Remove the screws (3) Phillips head mount the
shock absorber and remove the shock
absorber.
GEA00935
7. Pull down the stainless steel light clamp until the wires are
exposed and disconnected.
8. Remove the screws (2) Phillips head from the cooler fan
and from the shock absorber cover and remove the cover.
ChillerThermistors
GEA00938
The cooler thermistors are located in the upper
and lower parts of the cooler compartment. They send
temperature signals to the processor.
GEA00936