mabe PSS21 Series, Service Manual

Page: 19 / 65

- 17 -
Door Handle
The door handles allow access to the cooler and freezer
compartments. They are mounted in front with 1 Torx head
screw.
1. Using a small flat-bladed screwdriver, slide the trim of the
handle down and pull it out.
2. Remove the lower Torx head screw.
3. Lift the handle with a movement of the inside and up until
the locking ears disengage. Pull the handle out to remove it.
Door packing
The door gasket is a packing set molded
inside a channel located in the door shell.
Door of Easy Access to the Comparison
of the Cooler
The cooler compartment allows access without
opening the cooler door.
1. Open the easily accessible door and remove the Torx head
screws on the hinge (2), located on each side of the door.
2. With a small flat-blade screwdriver, remove the door
frame and door frame assembly.
3. Remove the packing and slide the door out of the frame.
4. The easily accessible door also has an interlock switch
located on the upper right side of the interior frame. Remove
the Phillips screw and slide the switch assembly down and
out.
5. Disconnect the switch wires and remove them
.
1. Open the door.
2. Grasp the gasket and pull it outward until the molded
gasket separates from the door shell