5
There are two SET SCREWS located at the bottom of the hub, one on
each side. Remove the SET SCREW on the side facing the outside or
keyside, and leave the one facing the interior side (inside of the door).
If did, the outside lever will function as clutch freewheeling feature.
C. Check the hub of lock case if it is seated in the position as same as
the arrow mark "A" which is pointed to "B" hole direction. If yes, to
proceed next step.
IMPORTANT NOTE:
For Passage (F01), Privacy Lock (F02),
Store Lock (F14), Room Lock (F21),
and Closet/Storeroom Locks SKIP
THIS STEP.
For Asylum or Institution Lock (F30)
REMOVE SET SCREW ON BOTH
SIDES.