3
STEP 1: DOOR PREPARATION
A. Measure desired
height from
finished floor,
mark a horizontal
line on door
and door edge.
B. Align template on edge of door
with applicable horizontal at
height line. Check the chart of
drilling trim holes on template
and mark only holes for lock
function being installed.
C. Mortise door edge according
to measurements of installation
template and drill proper holes
for trims.
D. Recess for face plate, the dimension
is L 8-1/32" x W 1-5/16" x D 7/32"
(L 204mm x W 33mm x D 5.5mm) .
STEP 2: INSTALL STRIKE
A. Align strike template on jamb. Be
sure to keep 3/8" (9.5mm) distance
between lock centerline and strike
centerline. Bore 1" (25.4mm) diameter
holes into door edge, 1-1/8" (28.6mm)
deep. Recess 5/32" (4mm) for flush
fit of strike and dust box.
B. Mortise jamb according to
measurement of strike template. Then
fit strike and dust box into frame and
secure into place with two (2) strike
mounting screws.
