background image

 38 

Common Water Problems 

 

Problem 

 Cause    Solution 

     

Cloudy Water   

•Inadequate filtration/dirty filter  

•Check to make sure the filter is running  

        properly; 

clean 

filter 

with 

filter 

cleaner 

 

        or 

degreaser. 

   •Excessive 

oils/organic 

matter 

 •Shock the spa with a chlorine or  

 

        bromine 

sanitizer, 

or 

other 

shock 

  

 

 

 

 

 

 

 

 

treatment product.  

 

 

 

•Improper sanitation/bacteria 

 

•Increase sanitizer level to balance water  

        and 

shock 

if 

needed. 

 

 

 

•High pH and/or high alkalinity   

•Adjust pH; add appropriate sodium  

 

 

 

 

 

 

 

 

 

bisulfate product. 

   •Suspended 

particles/organic 

matter 

•Use 

clarifier. 

 

 

 

 

 

 

 

 

Note:

  If using an ozone generator or    

        CleanZone™, 

consult 

your 

dealer 

before 

 

        using 

polymer 

based 

clarifiers. 

 

 

 

•High total dissolved solids (TDS) 

•Depending on the severity, drain the spa  

        to 

half 

and 

refill, 

or 

drain 

the 

spa 

  

        completely, 

clean 

and 

refill. 

   

Water Odor 

 

•Excessive organics or chloramines; 

•Shock the spa with a chlorine or 

 

 

 

insufficient free available sanitizer 

bromine sanitizer/shock, or other shock   

 

 

 

 

 

 

 

 

treatment product. 

   •Improper 

sanitation 

  •Increase 

sanitizer level to balance water;  

 

 

 

 

 

 

 

 

shock if needed. 

   •Inadequate 

filtration 

  •Check 

to make sure the filter is running  

        properly; 

clean 

filter 

with 

filter 

cleaner 

 

        or 

degreaser. 

   •Low 

pH    •Raise 

pH 

with 

sodium 

bicarbonate 

 

 

        product. 

If 

metals 

are 

present, 

add 

 

 

 

 

 

 

 

 

 

 

 

chelating agent.  

 

 

 

 

Chlorine Odor   

•Too many chloramines/ 

 

•Shock the spa with a chlorine  

   insufficient 

free 

   sanitizer/shock, 

or 

non-chlorine 

shock 

 

 

   available 

chlorine 

  treatment. 

   •Low 

pH    •Adjust 

pH; 

raise 

pH 

with 

sodium 

 

 

        bicarbonate 

product. 

    

Bromine Odor/   

•Low pH 

 

 

 

•Adjust pH; raise pH with sodium 

Yellow 

Water 

      bicarbonate 

product. 

    

Musty Odor 

 

•Bacterial or algae growth 

 

•Shock spa with a chlorine or bromine   

        sanitizer/shock, 

or 

equivalent 

shock 

 

        treatment 

product. 

If 

problem 

is 

visible, 

 

        drain, 

clean, 

refill 

and 

balance 

spa. 

  

Foaming/Scum   

•Build up of body oils, lotion and 

•Skim foam off using your leaf net or,    

Ring Around the  

chemicals resulting from soap or 

  drain and refill. 

 

Tub 

 

 

detergent 

 

 

 

 

 

 

 

 

 

 

Algae 

  •pH 

Imbalance 

   •Adjust 

pH 

 

 

 

•Low free chlorine or bromine   

•Shock with a chlorine or bromine 

 

 

 
 
 

Summary of Contents for 2007 Elite spas

















































Reviews: