MAAX 2007 Elite spas, Owner'S Manual

Page: 31 / 48

31
Sequencing Speeds
When first energized, the sequencing program will
automatically go to the default speed, or “S1”. To
change the sequencing speed, push the
SPEED button
once. The LCD will momentarily display the selected
speed (S1, S2, or S3), and then alternately display the
current program and the sequencing speed.
Pausing
To pause the sequencing action of the system
at any point, simply press the PAUSE button. This
will suspend the operation of the valves and hold them
either until the sequence is resumed or until the system
is de-energized. The LCD display will alternate
between “PA” and the current program number. Press
the
PAUSE button again to resume normal operation.
Entertainment System (Optional)
Certain models are equipped with an audio system
designed to provide the ultimate spa entertainment
experience. Power to the entertainment system is
supplied at spa startup so it is always ready for your
enjoyment.
Refer to the stereo Owner’s Manual included in
the MAAX Collection Owner’s packette for
instruction on programming and using the
entertainment system. Read all instructions carefully
before using the entertainment system and SAVE THE
INSTRUCTIONS.
The system includes both a wired and a wireless
remote. To operate the wired remote, simply press the
desired function on the key pad. To operate the
wireless remote, point it at the side skirt panel of the
spa where the stereo is located, or at the IR receiver on
the front inside lip of the spa. Refer to the stereo
Owner’s Manual for further instructions on how to use
the remotes.
Note: The wireless remote control is water
resistant, not waterproof. Care should be taken when
using from within the spa. Do not submerge the
wireless remote control.
CAUTION: Risk of electrical shock.
Do not
leave stereo compartment door open.
CAUTION:Risk of electrical shock. Replace
components only with identical components.
CAUTION: Risk of electrical shock. Do not operate
the audio/video controls while in the spa.
CAUTION: Risk of electrical shock.
When the
power supply connections or power supply cord(s) are
damaged; if water is entering the audio/video
compartment or electrical equipment compartment
area; if the protective shields or barriers are showing
signs of deterioration; or if there are signs of other
potential damage to the unit, turn off the unit and refer
servicing to a qualified service technician.
WARNING: Prevent Electrocution.
Do
not connect any auxiliary components (for example
cable, additional speakers, headphones, additional
audio/video components, etc.) to the system.
WARNING: Prevent Electrocution. These
units are not provided with an outdoor antenna. When
provided it should be installed in accordance with
Article 810 of the National Electric Code,
ANSI/NFPA 70.
WARNING: Prevent Electrocution.
Do
not service this product yourself as opening or
removing covers may expose you to dangerous voltage
or other risk of injury. Refer all servicing to qualified
personnel.
WARNING: Prevent Electrocution. This unit should
be subjected to periodic routine maintenance (for
example once every 3 months) to make sure the unit is
operating properly.