© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
If you want to reset the switch, refer to
General Settings - Reset Settings
General Settings Defaults
This table describes the general settings defaults and what will happen to the general settings when you reset the
switch.
Reset mode
Items affected
Reset ALL settings to factory default
by using the web interface
- and -
Hard reset with the menu button at
the front panel
Reset IP address to the default IP
address, displayed at the front
end display.
The default IP address is always
the factory-given IP address per
device.
Reset subnet mask to
255.255.255.0
Reset default gateway to 0.0.0.0
Reset password to "admin"
Reset name to "MA Switch"
Reset ID to "1"
IGMP Snooping "No"
IGMP Querier "No"
Unknown Flooding "Yes"
Disable filters
Disable speed
RSTP enabled
All ports are manage ports
Preset Defaults
The following lists describes what preset includes what filters by default and what will happen to the presets when
you reset the switch.
Preset MA-Net2
The preset MA-Net2 contains the following filters by default:
MA-Net2 crtl IPv4
MA-Net2 data IPv4
Preset dot2-Net
The preset dot2-Net contains the following filters by default:
dot2-Net wing data
dot2-Net wing
11
