© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
7. Follow the screen instructions and click
Reload
.
The switch configuration is uploaded and saved in the startup configuration.
7.13. Reset Settings
By resetting the MA Network Switch, you return the switch to the state it was in when it was first time powered.
This is useful for troubleshooting problems that might be caused by manual changes after first time powered.
Refer to,
for a complete list of all settings and information they are reset.
Resetting the MA Switch is not reversible. After a reset, all previous settings are lost and cannot be recovered.
Use the Web Interface
Requirement:
Connection to the web interface
.
1. Click
Tools /
Edit General settings
.
2. Click
Reset ALL settings to factory defaults
.
A warning asks if you are really sure to reset to factory default.
3. Click
OK
.
It might take a little while for the process to complete.
The MA Network Switch restarts. All settings are set back to the
Use the Menu Button
1. Press the
menu button
on the switch for at least 5 seconds until the reset screen appears.
2. Press the
menu button
again for at least 5 seconds until the booting screen appears.
The MA Network Switch turns off and restarts. All settings are set back to the
62
