MA lighting MA 2Port Node, Quick Manual

Page: 40 / 47

MA 2Port Node
Data
Transport
Safety
instructions
Safety and
environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
39
Save Configuration /settings
You can save the settings of MA 2Port Node only the hard drive of a grandMA2 console/onPC.

Open menu SETUP / NETWORK / MA NETWORK CONFIGURATION / DMX NODES and press button
SAVE
TO DEFAULT
.
NOTE
: With command
SAVE SHOW
settings of the MA 2Port Node are not stored; settings must be stored with
S
AVE TO DEFAULT
!
Load Configuration /settings


Open menu SETUP / NETWORK / MA NETWORK CONFIGURATION / DMX NODES and press button
LOAD
FROM DEFAULT
If you have integrated additional 2Ports into the Show or exchanged a 2Port, after having saving the
configuration, these 2Ports will not be taken into account when loading this configuration (even if the IP address
wasn’t changed). You will first have to configure these „new“ 2
Ports and then create a new configuration file using
SAVE CONFIG.