MA 2Port Node
Data
Transport
Safety
instructions
Safety and
environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
34
Display
The MA 2Port Node display will only show the most important settings. For configuring a node, you have to use a
grandMA console or at the onPC versions alternatively the
„onPC“ software.
After switching the device on, the display will show this menu:
Name of MA 2Port Node
e.g. 2Port
DMX Output
e.g. 30 = frequency of DMX-output in Hz; max. 30Hz possible
IP
–
Address
e.g..192.168.0.244
Mode
MANET2 or ARTNET
Number of Session
e.g. Session 1 - MA 2Port Node is part of session 1
e.g. Session 0 = no session
e.g. Session 3 + areas OUT grey highlighted = no active session
Configuration of DMX-Ports
In
–
this port receives DMX
OUT
–
this port sends DMX
Flashing frequency of the green area corresponds to the
refresh quote between MA 2Port Node and PC/console
OFF
–
this port is off
Univers
Univers number of respective ports 1 - 256
Summary of Contents for MA 2Port Node
Page 1: ...MA 2Port Node QuickMAnual Version XIX 6 deutsch english Art Nr 1366M 00163...
Page 2: ......
Page 46: ...45 Notizen notes...
