I
NSTALLING
A
P
HYSICAL
SWG A
PPLIANCE
M86 S
ECURITY
SWG S
ETUP
G
UIDE
V
. 10.2
8
3.
Connect your PC to one of the ports on the Gigabit Ethernet
switch in I/O switch module Bay 1 on the appliance using a
ethernet cable.
4.
Power up the blades as follows:
Figure 1: Physical Control Panel for a Blade
In the control panel for the blade:
a.
Press the
KVM Select
button so that the VGA screen
attached to the chassis displays output from the blade
being powered up.
b.
Press the
Power
button until the blade turns on. After the
blade finishes booting, a login prompt is displayed.
5.
Continue by doing either of the following:
y
Repeat Step
1.
for each blade, and when done, continue with
initial Setup of your SWG Appliance blades using the Limited
Shell.
or
y
Continue with Initial Setup of this SWG Appliance blade using
the Limited Shell, and when done repeat Step
1.
for each
blade..
NOTE:
For more information on setting up the SWG 7000, contact
your M86 Security representative.
