M86 Security SWG, Setup Manual

Page: 18 / 27

L
IMITED
S
HELL
C
ONFIGURATION
C
OMMANDS
M86 S
ECURITY
SWG S
ETUP
G
UIDE V
. 10.2 18
config_ ...
Enables network, service and Policy Server configuration. Press the
tab button twice to display the
config_network
,
config_time
,
config_hardware
,
config_upgrade
,
config_support
,
config_psweb
,
config_exclude
,
config_bridge
,
config_psha
,
and
config_access_log
commands.
config_network
Allows system administrators to configure network parameters, such
as the IP address(es), routing information, DNS parameters. Enter
the config_network command.
The current network configuration is displayed (i.e. the DNS Search
Domain, nameserver and Hostname configuration). A Name Server
is a network server that provides a naming, or directory service. A
prompt is displayed asking you if you would like to change the
configuration. Enter
y to change the network configuration.
Select an option from the following commands:
y
View: This command allows you to view the current network
configuration: The IP address assigned to each interface, the
current DNS configuration and the current hostname
configuration.
y
Interface: Allows system administrators to modify interface
related parameters such as: Add, Remove or Change an IP
address from a physical interface; Add, Remove or Change
routing information; Enable or Disable a physical interface.
ƒ
Choose an interface, for example, 1 (eth0). The
editing options are displayed.
ƒ
Choose an editing action, for example, 1 (Change IP
address). To add a static route, choose 4 (Add
route). The new route must be input as ‘IP/via prefix
IP’. For example, 1.1.1.1/32 via 10.0.3
y
Gateway : Allows system administrators to set the default
gateway of the appliance. The IP address of the default
gateway must be a local IP address. It is mandatory to
configure a default gateway to the appliance.