M86 Security HL, Installation Manual

Page: 33 / 96

I
NSTALL THE
S
ERVER
S
TEP
1: I
NITIAL
S
ETUP
P
ROCEDURES
M86 S
ECURITY
I
NSTALLATION
G
UIDE
27
I
NSTALL THE
S
ERVER
Step 1: Initial Setup Procedures
This step requires you to link the workstation to the Threat Analysis Reporter. You
have the option of using the text-based Quick Start setup procedures described in
Step 1A, or, if you have an SL or HL unit, the LCD panel setup procedures
described in Step 1B.
NOTE : Before installing the Threat Analysis Reporter server, the Web Filter server to be
used with this server must already be installed and running software version 4.0.00 or
higher.
Quick Start Setup Requirements
• Threat Analysis Reporter with AC power cord(s)
• either one of two options:
• PC monitor with AC power cord and keyboard, or
• PC laptop computer with HyperTerminal and serial port cable (and USB DB9
serial adapter, if there is no serial port on your laptop)
NOTE : If using a Windows Vista or Windows 7 laptop, please be sure HyperTerminal or an
equivalent terminal emulator program is installed on your machine. See the note under
HyperTerminal Setup Procedures if selecting this option.
Go to Step 1A to execute Quick Start Setup Procedures.
LCD Panel Setup Requirements (for SL and HL Units)
The following hardware is required for LCD panel setup procedures, if using an SL
or HL unit:
• Threat Analysis Reporter SL or HL with AC power cord(s)
• Bezel with LCD panel mounted on chassis front
Go to Step 1B to execute LCD Panel Setup Procedures.