7
■
lead from lead-based paints
■
Arsenics and chromium from chemically reacted lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment.
ACCESSORIES
●
Impact Driver 1Pc
●
Charger 1Pc
●
Battery pack 2Pcs
Be sure to check the accessories as it is subject to change by areas and models.
OPERATION
1.BATTERY CHARGING
The battery is supplied partially charged. To ensure full capacity of the battery, completely charge the
battery in the battery charger before using your power tool for the first time.
A fully discharged battery pack will charge in about 50 minutes in a surrounding temperature between
32° F (0° C) and 104° F (40° C).
1.
Charge the Lithium-Ion battery pack with the correct charger.
2.
Connect the charger to a power supply.
3.
Align the raised ribs of the battery pack with the slot in the charger.
4.
Slide the battery pack onto the charger .
5.
The charger will communicate with the battery pack to
evaluate the condition of the battery pack.
6.
The POWER BAR LED lights will cycle from right to left during
charging. This is part of the normal charging operation.
7.
After charging is complete, the green LED on the charger will
come on and the POWER BAR LED lights will go displayed
when the POWER BAR button is pressed while the battery
pack is on the charger.
8.
The battery pack will fully charge if left on the charger, but it
will not overcharge.
2. LED FUNCTIONS OF CHARGER
LED INDICATOR
BATTERY PACK RED LED GREEN LED
ACTION
HI/LO TEMP.
(SEE MANUAL)
Hot/Cold battery
On
Off
Charging will begin when
battery returns to 0
o
C-40
o
C
DEFECTIVE
BATTERY
Defective
Flashing
Off
Battery pack or Charger is
defective
BATTERY
CHARGING
Charging
Off
Flashing
Charging
BATTERY
FULL
Fully charged
Off
On
Charging is complete
Maintenance charging
