M7 DD-2050, User Manual

Page: 7 / 41

6
ADDITIONAL SAFETY RULES
FOR DRILLS
1. Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord. Contact with a “live” wire will
also make exposed metal parts of the tool
“live” and shock the operator.
2. Use auxiliary handle supplied with the tool.
Loss of control can cause personal injury.
3. Use clamps or another practical way to
secure and support the workpiece to a stable
platform.Holding the work by hand or against
your body leaves it unstable and may lead to
loss of control.
4. Know your power tool. Read operator’s
manual carefully. Learn its applications and
hazards related to this tool. Following this rule
serious injury.
in and loosening screws.
6. Always wear safety glasses with side shields.
Everyday glasses have only impact resistant
lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye
injury.
7. Protect your lungs. Wear a face or dust mask
if the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
8. Protect your hearing. Wear hearing protection
during extended periods of operation.
Following this rule will reduce the risk of
serious person injury.
9. Battery tools do not have to be plugged into
an electrical outlet; therefore, they are always
in operating condition. Be aware of possible
hazards when not using your battery tool or
when changing accessories. Following this
or serious personal injury.
10. Do not place battery tools or their batteries
explosion and possibly injury.
11. Do not crush, drop or damage battery pack.
Do not use a battery pack or charger that
has been dropped or
r eceived a sharp blow. A damaged battery
is subject to explosion.Properly dispose of a
dropped or damaged battery immediately.
12. Batteries vent hydrogen gas and can explode
in the presence of a source of ignition such
as a pilot light. To reduce the risk of serious
personal injury, never use any cordless product
battery can propel debris and chemicals. If
13. Do not charge battery tool in a damp or wet
location. Following this rule will reduce the risk
of electric shock.
14. For best results, your battery tool should be
charged in a location where the temperature
is more that 32°F (0°C) but less that 104°F
(40°C). Do not store outside or in vehicles.
15. Under extreme usage or temperature
conditions, battery leakage may occur. If
liquid comes in contact with your skin, wash
immediately with soap and water, then
neutralize with lemon juice or vinegar. If liquid
for at least 10 minutes, then seek immediate
medical attention. Following this rule will
reduce the risk of serious personal injury.
16. Save these instructions. Refer to them
frequently and use them to instruct others who
may use this tool. If you loan someone this
tool, also loan them these instructions.
WARNING: Some dust created by
power Cutting contains chemicals known
to cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
lead from lead-based paints
Arsenics and chromium from chemically
reacted lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment.
STANDARD ACCESSORIES
1PC
1PC
Drill
Charger
Battery pack
2PCS
Be sure to check the accessories as it is subject
to change by areas and models.