M7 DD-2050, User Manual

Page: 3 / 41

2
GENERAL SAFETY RULES
WARNING: Read all instructions. Failure to
follow all instructions listed below may result in
The term “power tool” in all of the warnings listed
below refers to your mains operated (corded)
power tool or battery operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS
1. WORK AREA SAFETY
1) Keep workplace clean and well lit. Cluttered
and dark workplaces invite accidents.
2) Do not operate power tools in explosive
atmospheres, such as in the presence of
create sparks which may ignite the dust or
fumes.
3) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. ELECTRICAL SAFETY
1) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
will reduce risk of electric shock.
2) Avoid body contact with earthed or grounded
surfaces such as conduits, radiators, and
refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
3) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
4) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
5) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
3. PERSONAL SAFETY
1) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
2) Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non- skid safety shoes, hard hat,
or hearing protection used for appropriate
2. TOOL SPECIFICATIONS
Model DD DH
Motor(V) 18 18
No-load speed( )LO 0- 50 0-
No-load speed( )HI 0-1
Impact rate( )LO 0-6 00
Impact rate( )HI
Max torque (N.m)
Max clutch (mm)
Drill weight (kg)
Battery type
0-1 0
50
0
NO
NO
13
Lithium-Ion
Charger input(V )
Battery capacity(Ah) 100-240V
0-2 00
13
Lithium-Ion
100~240V
Allowable temperature range (
o
C)
0-40 0-40
NOTE: Due to
change without prior notice.