Figure 3.1 –
exchange of connection impossible
3.1.1
Canister filling
The manufacturer of the TRITON recommends to use the soda SOFNOLIME 797 grade
mesh 1.0-2.5 mm.
Canister filling must be done in an dry and well ventilated place.
Canister filling is made according to the following steps:
1. Get out the canister of the scrubber.
2.
Place the water-resistant dust filter in the base of the canister
; This filter is useful
to contain the possible soda dust inside the canister and not into the loop and its
hydrophobic behaviour helps to protect the soda from the possible water which can be
inside the loop. indeed, the liquids are harmful for the soda and can affect its good
operation.
3.
Fill the Canister
with the soda until the limit.
10
