m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860
MODBUS to Downlink converter
:
convert the .XLS configuration file in one or more downlink payload to be sent to the device instead using USB port-.
Temporary Downlink
:
the configuration file is executed and then discarded.
Configuration Downlink
:
the configuration file is saved in memory and executed periodically.
4.3 Other settings
Delay for reading [ms]
:
delay added between the reading of one Modbus register and the one (default = 0).
DST
:
set to change DST (default: none).
Time sync uplink
:
set to disable time synchronization request (default: enabled).
Normally sensor asks for a time sync at every power on (uplink starting with 01) or once a week. If no or wrong reply received, it will retry after 1 week.
If not handled in the right way can generate unnecessary traffic on the network.
Please check chapter 2.1
.
Confirmed Uplinks
:
set for unconfirmed uplinks (default: confirmed uplink).
Single join/day
:
set for to allow only one join per day (default: multiple join allowed).
LED working
:
Set OFF to turn off the diagnostic led.
USB
:
Internal use.
5. Diagnostic
