M2I Corporation Industrial HMI Touch Panel HW Installation Manual
M2I Corporation
M2I Bldg, 35-11, Jeonpa-ro 24beon-gil, Manan-gu, Anyang-si, Gyeonggi-do, 430-857, Korea. Tel :+82-70-465-3366,Fax:+82-31-465-3355 www.m2i.co.kr
21 / 23
Chapter 8. Maintenance
8.1 Cleaning the Display
When the surface or frame of the display become dirty, spray the cleaning solution onto a soft cloth and wipe
the device. Do not spray the cleaning solution directly onto the device.
8.2 Periodic Check Points
Check the followings periodically for best condition of the device
(1) Environment
a. Is the operating temperature within the allowable range (-10°C~50°C)?
b. Is the operating humidity within the allowable range (10%~80%RH)?
c. Is the Surrounding pollution no corrosive gas?
(2)
Power
Is the input voltage within the change range (-15%~+10%)?
(3)
Related Items
a. Check the guarantee duration of LCD Backlight by eye.
b. Check the touch pad there is no damage, scratch or pollution by eye.
8.3 Problems with the Device
a. If there is a problem during operation, stop using it and contact the A/S department of M2I Corporation,
which is indicated on the product label.
b. Only the authorized worker from M2I Corporation can check and repair problems related to malfunction
of the machine.
c. If the problem cannot be solved at the installation site, the equipment can be collected and moved to
M2I Corporation.
d. The manufacturer, M2I Corporation, is not responsible for damage or malfunction of the equipment
caused by the use conditions of the user beyond the installation and use standards described in the
manual.
