www.redrockmicro.com
M2 Cinema Lens Adapter Manual
page
17
©2006 Redrock Microsystems, LLC. All Rights Reserved.
(7) Replace the two screws. You may need to use the longer screws that are supplied with the shim
kit to accommodate the extra depth of the shims.
(8) Return the rods to the Rod Support base. They will no longer fit completely beneath the rod
support block. This is normal. There is still sufficient support for this application.
(9) Return the M2 Housing to the rods, slide it forwards, and verify that the vertical alignment is now
correct.
6.
Adjust the horizontal alignment.
Determine whether horizontal alignment is required.
Most cameras will require horizontal alignment.
The horizontal alignment of the M2 with your
camera is critical to getting good results from the
M2 Cinema Lens Adapter.
The M2 Rod Support System provides horizontal
adjustments.
(1) Remove the UV Lens Filter and Rubber Hood from the back of the M2 Housing. This will enable
the Achromatic Lens to rest flush against the M2 Housing.
(2) Using the supplied wrenches, loosen the two Horizontal Adjustment Screws in the bottom of the
Rod Support base. The adjustment method described in the following steps ensures that the
adjustment will be horizontal (correct) and not skewed (incorrect).
