M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722
Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com
©2022 M2 Antenna Systems Incorporated
6.09.22
Rev.01
M2 Antenna Systems, Inc.
Model No: RC2800PRKX1SU
SINGLE AXIS CONTROLLER
SPECIFICATIONS
MODEL NUMBER .................................................... RC2800PRKX1SU
POWER REQUIREMENTS. ..................................... 97-240 VAC @ 12A
ENCLOSURE SIZE .................................................. W=19” / H=5.25” / D=10”
COLOR ..................................................................... Black Anodized
POINTING ACCURACY ........................................... <0.1°
READOUT ACCURACY ........................................... <0.3°
MINIMUM COMMANDED MOTION ......................... >0.25°
DIGIT SIZE ............................................................... 0.5” Heading / .375” Mode / Speed
CONTROL SWITCHES ............................................ Tactile 0.5” Diameter
MICROPROCESSOR TYPE .................................... “Microchip” PIC18F2520-I/SP
CONTROLS .............................................................. Power Switch, ON / OFF
Speed Buttons, Increments 1-9
Clockwise & Counterclockwise Buttons
Up & Down Mode Buttons
MODES..................................................................... (3) Operational Run Modes / (10) Presets
STANDARD OUTPUT VOLTAGE ............................ POL 48VDC 6.7A
COMPUTER INTERFACE ........................................ RS232 Port
Advanced Operations
Controller Oveview
Connections / Start UP
Tr
ouble Shooting
FEATURES
The
M2 RC2800PRKX1SU
is our Mid Grade rack-mount controller. The
RC2800PRKX1SU
was developed for “Commercial Grade”
Polarity Pedestal Models.
The
M2 RC2800PRKX1SU
uses a Microchip PIC18F2520-I/SP for Micro processing user commands, M2 software and EEprom for
memory. User modes include: (3) Operational / Run Modes and (10) programmable presets.
The
M2 RC2800PRKX1SU
uses
PWM
(Pulse Width Modulation) for speed control, allowing for full torque at the slowest input
speed. Location heading from the motor assembly is supplied via an Open Loop Circuit to the controllers’ microprocessor.
The
M2 RC2800PRKX1SU
software also includes a full
GUI
software for setup and run modes and a Interface Control Document
(ICD)
is supplied with the
RC2800PRKX1SU.
Computer interface to the
RC2800PRKX1SU
is via an RS232 port.
