STEP 13:
Assemble the ELEMENT MOUNT
assemblies for the reflector and front director
element. Refer to the assembly drawing to aid in
assembly. Be sure to center the ELEMENT
CENTER SPLICE and the holes are in the
vertical position.
STEP 14:
Assemble the DRIVEN ELEMENT
MOUNT assembly for the DRIVEN ELEMENT.
Refer to the assembly drawing to aid in assembly.
Be sure to center the INSULATOR and the hole
are in the vertical position. The DISC
INSULATORS are a press fit. Heating them with
a heat gun or hot water will help in assembly.
40M3C ELEMENT MOUNT ASSEMBLY
INSTRUCTIONS
BOLT, 1/4-20 X 2-3/4”
LOCKNUT, 1/4-20
(QTY 4)
ELEMENT MOUNTING
PLATE
(M2AEC0040)
(QTY 2)
ELEMENT CENTER SPLICE
(M2ASR0050)
ELEMENT MOUNT ASSEMBLY
REFECTOR OR DIRECTOR
BOLT, 1/4-20 X 2-1/2”
LOCKNUT, 1/4-20
(QTY 4)
CRADLE 3”
(M2AMC0136)
(QTY 2)
VERTICAL RISER
ASSEMBLY
(M2AVR0010)
BOLT, 1/4-20 X 3-1/2”
AND LOCKNUT
(QTY 2)
CRADLE 3”
(M2AMC0136)
(QTY 2)
ELEMENT MOUNTING
PLATE
(M2AEC0040)
(QTY 2)
BOLT, 1/4-20 X 2-1/2”
LOCKNUT, 1/4-20
(QTY 4)
INSULATOR
(M2AFG0034)
VERTICAL RISER
ASSEMBLY
(M2AVR0010)
BALUN BRACKET
(M2APT0016)
DISC INSULATOR
(M2ADI0020)
(QTY 2)
ELEMENT MOUNT ASSEMBLY
DRIVEN ELEMENT
BOLT, 1/4-20 X 2-3/4”
LOCKNUT, 1/4-20
(QTY 4)
BOLT, 1/4-20 X 3-1/2”
AND LOCKNUT
(QTY 2)