M13design M13-RA6M3-EK, User Manual, Page: 49 / 52

User Manual - Rev1.0.2 Ordering information
M13design - 16 Dec. 21 49/53
7 ORDERING INFORMATION
7.1 PART NUMBER DESCRIPTION
Table 59. Ordering Information
Part Number
Variant Type
Eval
Board
SDRAM
Ready 1
TD7740
camera
MIKROE-
2046
M13-RA6M3-EK Default
M13- RA6M3-EK-SDRAM SDRAM Camera
M13- RA6M3-EK-VGA VGA Camera
M13- RA6M3-EK-WIFI Wi-Fi Module
Note 1: SDRAM ready means the board is pre-soldered with the SDRAM’s selection shunts as detailed in section 5.1.SDRAM Selection
M13 RA6M3 EK
M13design MCU / MPU Type: Evaluation Kit Variant type:
- RZ/A2M
- RA6M3
- Etc…
- Blank: Default
- SDRAM: Include a VGA camera
- VGA: Include a MIPI camera
- Wi-Fi: Include a Wi-Fi module for the Mikrobus
Interface
7.2 DEFAULT AND SDRAM-READY AVAILABLE FEATURES
Table 60 shows you which board feature is available for each version of the board. The “VGA” and “Wi-
Fi” Kit version are not mentioned in this table as they are actually the Default version with its respective
accessory added to the kit as detailed in Table 59 .
Table 60. Default/SDRAM-Ready Features
Board Feature Default version
SDRAM
Ready
32 MByte external SDRAM
32 MByte external Serial Flash
16Kbit I²C EEPROM
4.3-inch 480x272 TFT LCD with capacitive touch panel
USB Interface
LAN Interface
SD/MMC Host Interface (4 bits)
I2S Audio codec
3-Axis accelerometer
8-bit Interface camera
microSD card
Mikrobus
PMOD1
PMOD2
User switch and Reset switch
Mono- turn 10KΩ Potentiometer
User LEDs
Power-on LED