3. How to set parameter
1) Parameter Set
A. After completing parameter set , press the MODE key longer than 2sec.; you can finish parameter set.
PV displays current temperature, SV displays set temperature; then, controlling begins.
B. Press AT key more than 2sec, then the modulating system process automatically Auto-Tuning.
624
156
1248
※Use auto-tuning in case on big difference
on the temperature.
※Constant value could be changed on auto-
tuning.
120 x 120
1.0
531
133
1062
12
PASS
Manufacturer Moder
Plate size
P
I
d
LbA
10
InS
Input value
Possible to set a 0.1℃-unit withing -100.0℃~100.0℃
range.
0.0 or 1.0
11
LOC
Set data lock
LOCK -> Preventing from changing set value
oFF
d
Derivative time Possible to set a 1sec-unit within 0~2500sec.range.
9
LbA
Control loop
break alarm
Possible to set a 1sec-unit withing 0~9998sec.range.
6
P
Proportional
band
Possible to set a 0.1% unit within 0.1~999.8% range.
Automaticall
y set for
Auto Tuning
7
I
Intergral time
Possible to set a 1sec-unit within 5~9998 sec. range.
8
5
ALL
Low alarm
It sets the lowest alarm limit.
0
It is absolute value)
----
4
ALH
High alarm
It sets the heighest Alarm limit.
0
(It is absolute value)
- Up key can modulate ON/OFF.
The Timer begins working after current temp reaches
set temp. After a set time reaches, it stops ending
Control output . *The TIMER does not work in case of
'0 set'.
3
ALS
Alarm mode set
9 Alarm modes display in picture form. You can set
appropriate alarm mode by using up/down keys.
See Alarm mode variables. (option)
1
SV
Set Value
Set of the temperature required
30
2
tIm
Control ending
Time set
* H.m display->Hours,Minutes Unit:00H01m~99H59m
0
If you press the MODE key at this stage more than 2sec, parameter set is available.
If you press the MODE key, kinds of parameter will be changed one by one.
(See the following table.)
No.
Symbol
Setting Date
Description
Initial value
Turned on, then PV displays current temp.; SV displays a set valve.
on -> Impossible to change parameter set
oFF -> Possible to change parameter set
150 x 150
0.8
