Energy Butler Hybrid Series
User Manual
33
Wire transverse area 5.5-8.0mm2
15mm
Lithium battery connector assembly procedures
1) Select an appropriate DC cable.
2) Peel off the DC cable insulation sleeve for 7 mm.
3) Use a flathead screwdriver to open the clamping bracket in the connector.
4) Insert the stripped DC cable to the battery connector deep enough and toggle the clamping bracket to make sure it tightly
locked with the stripped cable.
5) Push the battery connector to the thread joint, and use an open wrench to lock the connector in a torsion of 2Nm tightly.
Cable type
Conductor transverse area(mm²)
AWG 10
Outside diameter (mm²)
Conductor core section (mm²)
5.5-8.0
4.0-6.0
