RailKing R-12 Subway Set
15
Headlights
To replace the headlights and other
end-of-car lights in the powered unit:
1. Remove the shell as described in the
“Lubrication and Greasing” section of
this booklet.
2. Pull out the bulb(s) you need to
change. (
See figure 8
)
To replace the headlights and other
end-of-car lights in the powered unit:
1. Remove the shell as described for
the interior lights, above.
2. Locate the marker or headlight wire
harnesses and unplug from two-pin
connector and replace entire harness.
(
See figure 9)
Replacement bulbs and wire ties are
available directly from the M.T.H. Parts
Department (order online:
www.mth-railking.com, e-mail:
[email protected]; mail: 7020
Columbia Gateway Drive, Columbia
MD 21046-1532, FAX: 410-381-6122).
Gently Pull Bulbs
Away From Socket To Remove
Figure 8
Unplug Marker Light Wires
From Socket To Remove
Figure 9
