Premier GP40 Diesel Engine Proto-Sound®2.0
20
FYS
Remedy
Once in FYS, the engine doesn’t
go into reverse.
When the FYS enters its last
sequence the bell automatically
comes on.
When FYS is enabled, pressing
the whistle and bell buttons has no
effect.
I push the direction button but the
next sound clip in the sequence
does not play or the engine does
not come out of FYS after fourth
press of the direction button.
So that FYS effects can be as
realistic as possible,
Proto-
Sound 2.0 disables the
reversing unit whenever FYS is
enabled. This way the engine
remains still at its stop as the
operator cycles through the
FYS sequences.
FYS is programmed to start
ringing the bell at that point. After
approximately 12 seconds it will
automatically turn off.
Because FYS must control various
effects in each sequence, Proto-
Sound 2.0 takes control of these
sound effects until you exit FYS.
Each FYS clip must play for
approx. 30 seconds before FYS
will advance to the next step in the
FYS cycle. Wait at least 30
seconds in each FYS sound clip
before pressing the direction
button.