21
E8 Operating Manual
Programming For Proto-Coupler® Operation-
Reset Feature 10
(2 Clanks)
Reset Feature 10 allows
you to turn the operation of
the ProtoCoupler on or off.
When OFF, the coupler
will not arm or fire from
Neutral. To use, cycle to
Reset Feature 10 and press
the Horn/Whistle button.
The engine will play a
series of bells. This
indicates the current setting. Each time the Horn/Whistle button is pressed,
Proto-Sound® will cycle to the next available setting and provide the
appropriate bell indicator. The settings for Reset Feature 10 are 1 Bell =
ON, 2 Bells = OFF. When the desired setting is reached, lock the changes
by interrupting the throttle and cycling the engine into forward.
Turning Off Cab Chatter Sounds
-
Reset Feature 23 (4 Clanks, 3
Clinks)
Reset Feature 23
allows you to turn the
operation of the Cab
Chatter system on or
off. When OFF, the
Cab Chatter
recordings will not be
played when the
engine is in Neutral.
To use, cycle to Reset 23 and press the Horn/Whistle button. The engine
will play a series of bells. This indicates the current setting. Each time the
Horn/Whistle button is pressed, Proto-Sound® will cycle to the next
available setting and provide the appropriate bell indicator. The settings for
Reset Feature 23 are 1 Bell = ON, 2 Bells = OFF. When the desired setting
is reached, lock the changes by interrupting the throttle and cycling the
engine into forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
10 Times
Listen For 2 Clank
And 0 Clink Sounds
Push The Horn/Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Coupler Setting
H
Listen For 4 Clank
And 3 Clink Sounds
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
23 Times
Push The Horn/Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Volume Setting
H
