![background image](http://html2.mh-extra.com/html/m-system/mls/mls_instruction-manual_3115974001.webp)
MLS
P. 1 / 3
EM-1644
INSTRUCTION MANUAL
MODEL
MLS
Input Resistor
DIGITAL MULTIPLIER
■
FRONT PANEL CONFIGURATIONS
INSTALLATION
Detach the yellow clamps located at the top and bottom of the
unit for separating the body from the base socket.
■
DIN RAIL MOUNTING
Set the base socket so that its
DIN rail adaptor is at the bot-
tom. Position the upper hook
at the rear side of base socket
on the DIN rail and push in
the lower. When removing the
socket, push down the DIN
rail adaptor utilizing a screw-
driver (–) and pull.
■
WALL MOUNTING
Refer to the drawings in the
following page.
TERMINAL CONNECTIONS
Connect the unit as in the diagram in the next page or refer
to the connection diagram label on top of the unit.
When input resistors are provided with the module, attach
them together with input wiring to the input screw termi-
nals.
The negatives of the input signals must be of the same
potential.
Clamp
(top & bottom)
DIN Rail
35mm wide
Spring Loaded
DIN Rail Adaptor
Shape and size of the base socket
are slightly different with various
socket types.
Body
Base Socket
Connection
Diagram Label
Front Cover
LCD Meter
(optional)
Specification
Label
The shape of base socket may be different
for some models.
BEFORE USE ....
Thank you for choosing M-System. Before use, check the
package you received as below.
If you have any problems or questions with the product,
please contact M-System's Sales Office or representatives.
■
PACKAGE INCLUDES:
Signal conditioner (body + base socket) ................. (1)
Input resistors ......................................................... (2)
The resistors are provided only with current input type.
■
MODEL NO.
Check that model No. described on specification label is
exactly what you ordered.
■
INSTRUCTION MANUAL
This manual describes necessary points of caution when you
use this product, installation, connection and basic mainte-
nance procedures.
COMPONENT IDENTIFICATION
■
HOW TO OPEN THE FRONT COVER:
Position your finger on the hook at the top of front cover and
pull.
Front Cover (open)
Span Adj.
Zero Adj.