COMPONENT IDENTIFICATION & DIMENSIONS
Unit: mm (inch)
35
(1.38)
50
(1.97)
64
(2.52)
45 (1.77)
90 (3.54)
4 (.16)
4 (.16)
9
(.35)
DIN RAIL
35mm wide
DIN RAIL ADAPTOR
DIN RAIL ADAPTOR
MARKING LABELS
MARKING LABELS
SPECIFICATIONS
[2 (.08)]
ALARM OUTPUT TERMINAL
(valid only with alarm output type)
N-PE TERMINAL
LINE TERMINAL
DIN RAIL
WIRING INLET
2
1
• When mounting, no extra space is needed between units.
WIRING BRIDGE (model: CNB2)
CIRCUIT & CONNECTION DIAGRAM
Thermal
Breaker
L
N/PE
1
2
Discharge
Element
ALARM OUTPUT
*
*
Terminal block provided for the alarm output option.
Schematic shows the operation in normal conditions.
INSTALLATION
■
DIN RAIL MOUNTING
The MAL is mounted on a 35-mm-wide DIN rail, closely
side by side. Position the upper hook on the DIN rail and
push in the lower. When removing the base, push down the
DIN rail adaptor utilizing a minus screwdriver and pull.
MAL
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-8162 Rev.1 P. 3 / 8
