![background image](http://html1.mh-extra.com/html/m-system/m1exm-2/m1exm-2_instruction-manual_3141070002.webp)
M1EXM-2
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-5983-A Rev.1 P. 2 / 5
COMPONENT IDENTIFICATION
Body
Lockslider
Connection Diagram
(Side)
Base (M1E-BS2)
Specifications
Display
Front Buttons
*
Base is not included in the package.
■
TERMINAL ASSIGNMENTS
5
10
1
6
7
2
3
4
8
9
15
20
11
16
17
12
13
14
18
19
No. FUNCTION
No. FUNCTION
1
Unused
11 Ch1
2
Unused
12 Ch1 Output –
3
Ch1 Potentiometer input 3 13 Unused
4
Ch1 Potentiometer input 2 14 Ch2
5
Ch1 Potentiometer input 1 15 Ch2 Output –
6
Unused
16 Unused
7
Unused
17 Unused
8
Ch2 Potentiometer input 3 18 Unused
9
Ch2 Potentiometer input 2 19 Power U (+)
10
Ch2 Potentiometer input 1 20 Power V (–)
INSTALLATION
Pulling out the base while pushing the lockslider on the top of the unit enables to remove the base from the unit (base is not
included in the package).
■
DIN RAIL MOUNTING (SIDE)
• Mounting the unit
A) Hang the upper hook at the rear side of unit on the DIN
rail.
B) Push the lower part of the unit in the direction of the ar-
row until the unit is firmly fixed to the DIN rail.
A
B
• Removing the unit
A) Push down the DIN rail adaptor using a minus screw-
driver.
B) Pull out the lower part of the unit.
C) Remove the upper part from the DIN rail.
A
B
C
■
WALL MOUNTING
Referring to “MOUNTING REQUIREMENTS unit: mm (inch)” on page 3, pull out the upper and lower sliders of the unit
and fix them with M4 screws (Torque: 1.4 N·m).