KS2V3
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-3603 Rev.3 P. 5 / 9
■
HOW TO SET PARAMETER BLOCK 1
Press SEL key for 3 seconds until the display turns to the setting mode for Parameter block 1.
Alarm SET 1 parameter
[Example]
Changing alarm setpoint (ST1) for SET1 from 100 to 200.
Key
Status or Operation
Display
Current display
(PTn = 1 in this example)
Display pattern 1
Upper = ST1 (setpoint)
Lower = ST2 (setpoint)
SEL
Keep pressing the key for 3 seconds.
→
Maintain while the display indicates Pat-
tern 2, Pattern 3.
Upper = blank
Lower = ST1
SEL
Press the key once.
→
ST1 is replaced with current setting.
Upper = blank
Lower = 100
UP
DOWN
Press the keys until the display indicates 200.
tes 200. (New value is registered if the unit
is not accessed for 3 seconds.)
Upper = blank
Lower = 200
SEL
Press the key once.
→
The lower display indicates the param-
eter name (ST1) again.
Upper = blank
Lower = ST1
SEL
Keep pressing the key for 3 seconds.
→
Maintain while the display changes.
Display pattern 1
Upper = ST1 (setpoint)
Lower = ST2 (setpoint)
Alarm SET 2 parameter
[Example]
Changing alarm setpoint (ST2) for SET2 from 100 to 50.
Key
Status or Operation
Display
Current display
(PTn = 1 in this example)
Display pattern 1
Upper = ST1 (setpoint)
Lower = ST2 (setpoint)
SEL
Keep pressing the key for 3 seconds.
→
Maintain while the display indicates Pat-
tern 2, Pattern 3.
Upper = blank
Lower = ST1
DOWN Press the key once.
→
Next parameter name is displayed.
Upper = black
Lower = ST2
SEL
Press the key once.
→
ST2 is replaced with current setting.
Upper = blank
Lower = 100
UP
DOWN
Press the keys until the display indicates 50.
(New value is registered if the unit is not
accessed for 3 seconds.)
Upper = blank
Lower = 50
SEL
Press the key once.
→
The lower display indicates the param-
eter name (ST2) again.
Upper = blank
Lower = ST2
SEL
Keep pressing the key for 3 seconds.
→
Maintain while the display changes.
Display pattern 1
Upper = ST1 (setpoint)
Lower = ST2 (setpoint)
Display pattern
Selecting which display pattern should be indicated first
after the power is turned on, or when the unit returns to
display mode from setting mode.
[Example]
Changing display pattern (PTn) 1 to 3.
Key
Status or Operation
Display
Current display
(PTn = 1 in this example)
Display pattern 1
Upper = ST1 (setpoint)
Lower = ST2 (setpoint)
SEL
Keep pressing the key for 3 seconds.
→
Maintain while the display indicates Pat-
tern 2, Pattern 3.
Upper = blank
Lower = ST1
DOWN Press the key twice.
→
Next parameter name is displayed.
Upper = blank
Lower = PTn
SEL
Press the key once.
→
PTn is replaced with current setting.
Upper = blank
Lower = 1
UP
DOWN
Press the keys until the display indicates 3.
(New value is registered if the unit is not
accessed for 3 seconds.)
Upper = blank
Lower = 3
SEL
Press the key once.
→
The lower display indicates the param-
eter name (PTn) again.
Upper = blank
Lower = PTn
SEL
Keep pressing the key for 3 seconds.
→
Maintain while the display changes.
Display pattern 3
Upper = blank
Lower = blank
