47LM
P. / 6
EM-9504-B Rev.1
...
...
...
PARAMETER
Moving average
Low-end cutout
Low-end cutout value
Brightness
Automatic return time to Measuring Mode
Low-end cutout: Input signal below the preset cutout value is forcibly cut to 0.
Set for the two lowest digits of the scaled range (disregarding the decimal point)
With the cutout set to OFF, the low-end cutout value setting is locked.
Automatic return time to Measuring Mode: The display goes back automatically to Measuring Mode if the front buttons are left untouched
for the specified time period while it is in one of the setting modes (except the loop test output mode).
With this value set to 0, the display must always be exited manually from the setting mode.
Transition time to Lockout Setting Mode: The display goes to Lockout Setting Mode only when the designated buttons are pressed for the
specified time duration.
*
1. F00.0 = 25 msec. refreshing rate
Specify in seconds
Brightness level 1 (dark)
Low-end cutout value setting
Low-end cutout ON
Low-end cutout OFF
Moving average with 8 samples
Moving average with 4 samples
Moving average with 2 samples
Moving average with 64 samples
Moving average with 32 samples
Moving average with 16 samples
Brightness level 4
Brightness level 5 (bright)
Brightness level 3
Brightness level 2
No moving averaging
INDICATORS
FUNCTION
DEFAULT
VALUE
DISPLAY
Fnc
Fnc
Zro Fnc
D/P Fnc
D/P Fnc
D/P Fnc
Transition time to Lockout Setting Mode
Specify in seconds
Fnc
Version indication
Version number, indication only
N/A
N/A
N/A
...
Fnc
Display refreshing rate
*
1
Specify in seconds
2.00
2.00
2.00
2.00
