![background image](http://html2.mh-extra.com/html/m-system/47-series/47-series_operating-manual_3059829182.webp)
182
47DR OPERATING MANUAL EM-9509-B Rev.7
25.6 LONG REGISTER
25.6.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the settings.
1
Hold down Alarm/
↓
and Shift buttons at once for 3 seconds or
more to move on to Modbus Setting Mode.
• The device address is indicated.
• The SD indicates ‘EQP-NO’.
2
Press Alarm/
↓
or Init/
↑
button to go to the long register setting.
• The long register is indicated.
• The SD indicates ‘L-WORD’.
3
Press Shift and Up buttons to select the long register.
• Select ‘NORMAL’ or ‘SWAP’.
4
Press Alarm/
↓
or Init/
↑
button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the device address will be indicated (‘EQP-NO’ on the SD).
• Press Init/
↑
button, and the T3.5 timer will be indicated (‘T35’ on the SD).
1,2,
4,5
2,4,
5
1,3
3
Blinking