06
|
www.m4sol.com
MS-310U1R USER GUIDE
RS-232 Control
The MS-310U1R can distribute bi-directional serial commands between the transmitter and receiver
to allow for control commands to be sent alongside the video and audio distribution.
Each HDBaseT unit is fitted with a 3-pin phoenix connector block that will need the serial TX, RX
and Ground pins terminating into for serial pass-through. HDBaseT has the ability to transparently
send any type of serial data as both pieces of equipment are able to communicate using the same
baud rate, stop-gap, and parity.
USB
This KVM extender combines USB2.0 connectivity with video and audio to be passed between
host on the transmitter side (Type A to Type A USB cable - supplied), to a peripheral device on the
receiver side of the link only (no host at the RX).
The USB type A connections on the Receiver can be used to connect a USB2.0 camera, touch
screen, smart board, hard drive, games controller, USB audio device, printer, scanner, or HID
(mouse or keyboard) to a host device at the HDBaseT transmitter.
A maximum data transfer of 200Mbps can be achieved over the link - please note that this may not
be enough for some USB2.0 cameras to pass higher video resolutions.
Please use the supplied USB & HDMI cables to fit into the TX & RX connections neatly. Using
alternative cables may damage the connections due to the close proximity of the sockets.
