7
www.m-locks.com
E-Pass
V02
EN
MANAGER INSTRUCTIONS
7
ADDING CODES / USERS
With the manager code, up to nine additional opening codes can be added or deleted.
1
Press and hold ‘1’ until a double signal sounds. The LED will illuminate when performing the following
actions:
9
8
7
6
5
4
• Enter your personal Manager Code
1
• Enter User ID (1-9). If already occupied a long signal sounds.
For example:
9
9
9
9
9
9
• Enter the new User Code
9
9
9
9
9
9
• Enter the new User Code again
If an incorrect code is entered on the second occasion a long signal sounds and the old code remains
valid.
If the new code matches at least 5 digits with an already existing code the new code is not accepted.
Another user code must be selected and the entire process repeated.
8
DISABLING /ENABLING USERS
2
Press and hold ‘2’ until a double signal sounds. The LED will illuminate when performing the following
actions:
For example!
9
8
7
6
5
4
• Enter your personal Manager Code
All users are disabled. Please repeat this procedure to enable all users.
