M-LOCKS Basic line Series, User Manual

Page: 62 / 70

Page 16 of 24 IU_PulsePRO_05
skip the next step. LED remains ON.
Enter a Manager code or a Master code. Double beep.
Press to enter the date. Double beep.
Enter the date according to the date format selected through the
special function 05 (DD/MM/YY format, MM/DD/YY format). Double
beep.
Enter again the date to confirm. Double beep and LED goes off.
Reset mode (ERC function)
The ERC or emergency rescue code operation can be performed using an ERC code
only if requested.
The ERC function is useful in any case in which all the codes have been lost and there
is no possibility to open the lock.
ERC function restores the standard codes of the configuration already in use. All the
settings already set are not changed.
Press and hold until double beep. LED remains ON:
Enter your personal ERC code. LED flashing.
A double beep means operation done. LED goes off.
Reset mode (reset box function)
The reset of the system can be obtained through a
reset box
.
Reset box operation enables the “Pre Setup mode” restoring all the settings to the
standard values.
Connect the reset box to the “BAT” connector of the lock.
Press until double beep. LED quickly flashes:
Double beep and LED goes off after few seconds.
Configuration number
Configuration number of “Hotel mode” is 80. In this configuration Manager and User