M-LIVE OkyFly2, Reference Manual

Page: 11 / 73

9
Installation
1
1 - Installation
Power supply
Connect the power supply/adaptor
to the DC connector and then to a
mains power socket.
N.B.: as soon as it’s connected to a power
supply, OkyFly2 automatically switches on.
Switching on and off
Switching on: If connected to a power supply, but off, OkyFly2 can be
switched on by just pressing any key.
Switching off: To switch OkyFly2 off, just keep the STOP key pressed for a
few seconds.
N.B.: OkyFly2 must be in standby mode, i.e. there must be no backing tracks
being played or any editing menus being accessed.
To stop any backing tracks that are playing, press STOP twice, and press
ESC to exit the editing menu.
OkyFly2 also has an automatic shutdown system (which
can be enabled and disabled from the General Settings Menu),
which automatically runs after a short period of inactivity.