4
Publication: ZTB-080112
M-B Companies, Inc. 11/14/12
4
SAfETy
SAfETy ALERTS
Signal words and alert symbols notify of important safety precautions.
DANgER!
indicates a hazardous situation
which, if not avoided, will result in
serious injury or death.
WARNiNg!
indicates a hazardous situation
which, if not avoided, could result
in serious injury or death.
cAUTiON!
indicates a hazardous situation
or unsafe practice which, if not
avoided, could result in minor
or moderate injury or property
damage.
SAfETy DEcALS
Reading this manual and the safety instructions it contains will provide
you with the necessary basic knowledge to operate this equipment
safely and effectively. We have also placed several safety labels on the
unit to remind you of this important information while you are operating
your unit.
All DANGER, WARNING, CAUTION, and instructional messages on
your unit should be carefully read and obeyed. Bodily injury can result
when these instructions are not followed. The information is for your
safety and it is important.
These labels will act as a constant visual reminder to you, and others
who may use the equipment, to follow the safety instructions necessary
for safe, effective operation.
If any of these labels are lost or damaged, replace them at once. See
you local dealer for replacements.
WARNING
To prevent serious injury or death from
moving parts:
• Close and secure guards and shields
before starting.
• Keep hands, feet, hair and clothing away
from moving parts.
• Disconnect and lockout power source
before adjusting or servicing.
• Do not stand or climb on machine when
operating.
390-118352
MOVING PART HAZARD
MADE
IN THE
USA
390-140501
PRE-START gUiDELiNES
•
Install any covers or guards which may have been removed for
shipping purposes.
•
Before starting equipment, walk around equipment, making a visual
inspection that all safety devices are properly installed and secured.
• Check that all hardware, fasteners, hydraulic fittings, etc. are in good
condition and properly fastened. Replace any fatigued or damaged
items with proper replacements.
•
Personnel who are not required to be in the work area should be
kept away. Never start the equipment unless you are absolutely
certain that everyone in the area is clear of the machine and aware it
is being started.
•
Follow the manufacturer’s recommended start-up procedure.
Summary of Contents for ZTB
Page 2: ......