Quick Start Guide
2
ProFire 2626
4. Once the installer has completed, click “Finish.”
5. Shut down your computer.
6. Connect ProFire 2626 to a power outlet and to an available FireWire port on your
computer.
7. Turn on ProFire 2626 first, then turn on your computer. If you are using Windows
Vista, your ProFire 2626 installation is now complete. If you are using Windows XP,
proceed to steps 8-12.
8. Windows XP will identify the interface and will ask if you want to search the Internet
for a driver. Select “No, not this time” and press “Next”
4
.
9. Windows XP will display a Found New Hardware Wizard
5
.
10. Choose “Install the software automatically” and click “Next.”
11. Once the Wizard has completed, click “Finish.” You may be presented with a
second Found New Hardware Wizard. If so, then repeat steps 8-11.
12. When the installation is complete, you will see a message stating “Your new
hardware is installed and ready to use.”
ATTENTION:
Only connect and disconnect your ProFire 2626 when your
computer is powered off. Hotplugging may have adverse effects on the interface,
your computer, or both. For more information on this subject, please visit the
M-Audio knowledge base at www.m-audio.com.
