background image

Oxygen Keyboard Line User Guide

23

English

14  ›  Technical Info

Caution:

 Electro Static Discharge, Electrical Fast Transient and Conducted RF interference may cause the unit malfunctioning. In such 

case, unplug the unit and plug it in again to restore normal operation.

Note:

 Your M-Audio product has been tested to comply with FCC Standards FOR HOME OR OFFICE USE. Modifications not authorized 

by the manufacturer may void users authority to operate this device.

Note

: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

ASIO

 is a trademark of Steinberg Soft– und Hardware GmbH.

VST

 is a trademark of Steinberg Soft– und Hardware GmbH

Oxygen Keyboard Line

Tested to comply with
FCC standards

FOR HOME OR STUDIO USE

15  ›  Warranty Terms and Registration

Warranty Terms

M-Audio warrants products to be free from defects in materials and workmanship, under normal use and provided that the product 
is  owned  by  the  original,  registered  user.    Visit  www.m-audio.com/warranty  for  terms  and  limitations  applying  to  your  specific 
product.

Warranty Registration

Thank you for registering your new M-Audio product. Doing so immediately both entitles you to full warranty coverage and helps M-
Audio develop and manufacture the finest quality products available. Register online at www.m-audio.com/register to receive FREE 
product updates.

 

Summary of Contents for Oxygen 49




























Reviews: