40
Latch:
When set to Latch On, the Clip button will send one value when pressed and a different
value when pressed a second time, alternating between the two values with each press. When
set to Latch Off, the Clip button will send one value when pressed and one value when
released.
Available Values:
On/Off
Note On:
When Latch is active, the Clip button will send the MIDI note number with this
velocity when you press it to turn it on.
Available Values:
0-127
Note Off:
When Latch is active, the Clip button will send the MIDI note number with this
velocity when you press it to turn it off.
Available Values:
0-127
Expression Pedal
To edit the functionality of the expression pedal input when in Preset Edit Mode, press the
expression pedal. You can scroll through the available parameter values using the Encoder.
Select what parameter you would like to edit by pressing the Encoder.
•
Chan:
The sustain pedal will send its messages over this channel. Select the global
channel (
Global
), a specific channel (
Channel 1
–
16
), a zone (
Zone
1
–
4
), or all channels
(
Omni
).
•
CC:
The sustain pedal will send its MIDI messages using this CC number.
•
Min:
The lowest program in the range of programs will correspond with this value.
•
Max:
The highest program in the range of programs will correspond with this value.
FS2
To edit the functionality of the FS2 (footswitch 2) input when in Preset Edit Mode, press the
footswitch. You can scroll through the available parameter values using the Encoder. Select
what parameter you would like to edit by pressing the Encoder.
•
Latch:
When Latch is enabled, the pedal will send one value when pressed and a
different value when pressed a second time, alternating between the two values with
each press (“latching” or “toggle” behavior). When Latch is disabled, the pedal will send
one value when pressed and one value when released (“momentary” behavior).
•
Chan:
The sustain pedal will send its messages over this channel. Select the global
channel (
Global
), a specific channel (
Channel 1
–
16
), a zone (
Zone
1
–
4
), or all channels
(
Omni
).
•
CC:
The sustain pedal will send its MIDI messages using this CC number.
•
Min:
The lowest program in the range of programs will correspond with this value.
•
Max:
The highest program in the range of programs will correspond with this value.